Video Manuals of TM ColorWay CISS Canon MP230
*
The items needed for the manual instruction to plant a Ciss TM colorway are
•Complectation
• Inks marking
First of all Set the color plugs and fill in the tanks one by one by its own color as Magenta, black, cyan and yellow
Open small holes to pull the air inside the tanks.
• Take the cartridge and remove the stickers on its outer surface for drilling holes there.
Please note that the Upper hole for the magenta to be fit in should be drilled a bit lower
Install rubber compactors inside the drilled holes and finally push the syringe inside the air hole and press on piston slowly to get the color from the tanks inside the ink tail.
Connect the entire tails to the cartridges and set the cartridge station for injection and then pull the piston slowly towards yourself.
The tale should be binded so that it might not move on its own.
At last turn on the device and open the cover of the printer.
While doing so one should remember to disconnect the power cord so that the cartridge plays in line.
Install thecartridges in device and close the cartridge covers.
For the tale bend it with the help of the plastic holder by cutting an extra part of the holder to fasten it in the tale.
To maintain the free movement of the cartridge, move the cartridge in all way to the right and see the overall regulation of the length of the tale.
Finally fasten the other half of the tale to the body of the printer and shut down the cover of the device to test it at last.
Test the print page for printing.
The items needed for the manual instruction to plant a Ciss TM colorway are
•Complectation
• Inks marking
First of all Set the color plugs and fill in the tanks one by one by its own color as Magenta, black, cyan and yellow
Open small holes to pull the air inside the tanks.
• Take the cartridge and remove the stickers on its outer surface for drilling holes there.
Please note that the Upper hole for the magenta to be fit in should be drilled a bit lower
Install rubber compactors inside the drilled holes and finally push the syringe inside the air hole and press on piston slowly to get the color from the tanks inside the ink tail.
Connect the entire tails to the cartridges and set the cartridge station for injection and then pull the piston slowly towards yourself.
The tale should be binded so that it might not move on its own.
At last turn on the device and open the cover of the printer.
While doing so one should remember to disconnect the power cord so that the cartridge plays in line.
Install thecartridges in device and close the cartridge covers.
For the tale bend it with the help of the plastic holder by cutting an extra part of the holder to fasten it in the tale.
To maintain the free movement of the cartridge, move the cartridge in all way to the right and see the overall regulation of the length of the tale.
Finally fasten the other half of the tale to the body of the printer and shut down the cover of the device to test it at last.
Test the print page for printing.